Phoenix & the Valley · Water damage helpMon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Home › Blog › Detection Guide

Slab Leak Signs in Phoenix Homes

A slab leak hides under concrete. These are the signs that give it away — a warm floor patch, damp flooring, a rising bill — and the meter test that confirms it.

Phoenix Water Damage Pros · 2026-11-16 · Detection Guide

The short version

Problem: You suspect a pipe is leaking under your concrete floor, but there is no puddle to see.

What to do: Look for a warm patch on tile, damp flooring, running-water sounds when taps are off, and a rising bill — then run the meter test.

When to call: Call when the meter moves with all water off, or when flooring stays damp.

Why slab leaks hide

Most Phoenix homes sit on a concrete slab, and the water lines run under that slab. When a line starts leaking, there is no puddle to see. The water moves under the flooring, into wall materials, or toward the lowest part of the house before it becomes visible — and evaporation, flooring and air conditioning can mask the early moisture for days or longer.

A slab leak is not a burst pipe. A burst is sudden and visible; a slab leak is slow and hidden, and the damage builds quietly. Water under the slab can keep flooring damp, wick into baseboards and lower walls, and create the damp conditions where mold can begin to grow — the EPA notes mold can begin to grow on damp surfaces within 24 to 48 hours, and a leak that runs for weeks keeps materials damp far longer than that.

The six signs, and what each one means

A warm patch on tile, concrete or another hard floor is the most specific sign: it points to a leaking hot-water line under the slab. Run your hand across the floor in the morning, when the house is quiet — a patch that is noticeably warmer than the floor around it is worth checking with a meter.

Damp flooring, or a floor that feels different underfoot in one area, is the second sign. Carpet that is damp at the edges, tile that feels cool and damp, wood that is starting to cup — any of them can mean water under the flooring. Check the baseboards too: swollen or pulling baseboards mean water has been sitting at the floor line.

The sound of running water when every tap is off is the third sign. Listen in a quiet evening, with the house still: a faint hissing or running sound from the floor or a wall points to a line that is leaking. A drop in water pressure across the whole house is the fourth — a weak flow at one faucet can be a clogged aerator, but a whole-home drop is different.

A water bill that rises without a change in use is the fifth, and the one most people notice first. Before assuming a slab leak, check the outdoor causes too: pool equipment, hose bibs and irrigation can all raise a bill. The City's guidance on unexplained increases in water use also recommends checking for less obvious outdoor leaks first.

Cracks in flooring, loose tile, or gaps opening up are the sixth. Flooring failure and normal foundation movement can cause the same symptoms without a leak — which is why the meter test matters, and why a sign on its own is not a diagnosis.

The meter test

The meter test is simple and it is the most useful first check. Stop all indoor and outdoor water use, including irrigation and appliances that refill or make ice. Then watch the meter: if it still moves, water is going somewhere — and a leak is likely. If the meter is still, the cause is probably elsewhere, and the outdoor checks come first.

If the meter moves, a leak-detection specialist locates the leak — the finding and the fixing belong to a plumber. The water damage work deals with what the leak did to the home: the wet flooring, the damp walls, the moisture under the slab edge, and the drying that follows.

What happens after a slab leak is found

The wet area is mapped with moisture meters: walls at the base, flooring, baseboards and the slab edge. Drying is slower than a burst pipe, because the water has been there longer and has soaked deeper — including into the slab, which releases moisture slowly. Flooring that has been wet for weeks may not dry back to its original shape, and readings decide what can stay and what must go.

Questions

Frequently asked questions

Questions people ask about this topic, answered plainly.

Look for a warm patch on a hard floor, damp flooring, the sound of running water when taps are off, a rising water bill, or a drop in pressure. The meter test helps: stop all water use, including irrigation, and see whether the meter still moves.

It depends on your policy. Sudden, accidental water damage is often covered; slow leaks and the pipe repair itself are often treated differently. Check your policy and talk to your insurer.

A plumber or leak-detection specialist locates and repairs the line under the slab. The water damage work — mapping, drying, and dealing with wet flooring and walls — is separate, and it can start while the repair is being arranged if rooms are already wet.

It depends on the flooring and how wet it is. Carpet can often be lifted at the edge to check and dry the pad; tile and wood are checked for loosening and cupping. Flooring that cannot dry back to a sound condition is removed rather than left in place.

Still have questions?

Call Now to reach a local water damage professional — describe the water and the rooms it reached.

Call Now

Contact

Call now for water damage help

Tap Call Now to reach a local water damage professional. Tell them where the water is, what it has touched, and whether it is still coming in.

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Call Now

Before you call

  • Shut off the main water supply if it is safe to do so.
  • Move valuables, rugs and electronics off wet floors.
  • Take photos of the water and the damage for your records.
  • Stay away from wet outlets, switches and light fixtures.
  • Note when the water started and what caused it, if you know.
Phoenix Water Damage Pros — helper
☎ Call Now