Phoenix & the Valley · Water damage helpMon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Home › Problems › Burst Pipe

Burst Pipe Water Damage in Phoenix

A burst pipe releases water at full supply pressure — and in a Phoenix home it often starts in the attic, above a ceiling you cannot see into. Here is what to do first, and what the cleanup looks like.

Call Now

Phoenix & the ValleyWhat to do firstHow the cleanup works

Need help with water damage?

Call Now to reach a local water damage professional. Describe the water, where it is, and what it has touched.

Call Now

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

1
Stop the water firstShut off the supply if it is safe, then get the water out.
2
Find the hidden waterMoisture checks look past the surface into walls and floors.
3
Dry it properlyAir movers and dehumidifiers dry structure, not just the surface.
4
Document everythingPhotos and notes help when you talk to your insurer.
Problem

Where burst pipes happen in Phoenix homes

Attic supply lines are the most common burst-pipe call in the Valley. The attic is the hottest part of the house, pipes run above the ceiling, and a failure there sends water straight onto drywall and insulation. The ceiling stain is the clue; the wet insulation and the ceiling cavity above it are the job.

Flexible supply hoses are the second pattern: the braided hose to a toilet, a washing machine, a dishwasher or a refrigerator ice maker. They age, they bulge, and they split — usually when nobody is home, so the water runs for hours before anyone notices.

Fittings and joints fail too, especially where copper meets a fixture or where a joint was stressed. In winter, a rare hard freeze can split a pipe in an unheated garage or an exposed run. The cause matters less than the response: stop the water, get it out, map it, dry it.

Why a burst pipe spreads so far

The volume is what makes a burst pipe different from a slow leak. A supply line at full pressure releases a large amount of water in minutes. That water runs across the slab, into the next room, under baseboards and into cabinets — and it soaks the ceiling and the wall cavity above before the floor shows anything at all.

By the time the water is visible on the floor, the damage is usually wider than it looks. That is why the wet area is mapped with moisture meters rather than guessed from the puddle, and why the rooms next door are checked too.

What to do now

  • Shut off the main water supply at the meter box near the street or on the house wall near the water heater.
  • Move valuables, rugs and electronics off wet floors.
  • Stay away from wet outlets, switches and light fixtures.
  • Take photos of the water and every room it reached.
  • Call for help — describe where the water is coming from and which rooms are wet.

Call Now

Causes

What causes it

Attic supply lines

Heat-aged lines and fittings above the ceiling give way and send water onto drywall and insulation.

Supply hoses

Braided hoses to toilets, washing machines, dishwashers and ice makers split — often while nobody is home.

Fittings and joints

A joint that was stressed or corroded lets go under supply pressure.

Rare hard freezes

A freeze can split a pipe in an unheated garage or an exposed run during a cold snap.

Signs

Signs of this problem

  • Water dripping from a ceiling light fixture or a ceiling stain that is growing.
  • A sudden wet patch on a floor with no appliance nearby.
  • The sound of running water when every tap is off.
  • A wall that is wet to the touch, or paint bubbling on a wall.
  • A ceiling that sags or feels soft after a stain appears.

Related service: Burst Pipe Water Damage

Questions

Frequently asked questions

Questions people ask about burst pipe, answered plainly.

Shut off the main water supply if it is safe to do so, move valuables off wet floors, and stay away from wet outlets and light fixtures. Take photos of the water and the damage, then call for help.

Sudden, accidental water damage from a burst pipe is often covered by a standard homeowners policy, provided the home was maintained and heated normally. Check your policy and keep photos and readings for the claim.

Most Phoenix homes have the shutoff at the meter box near the street or on the house wall near the water heater. Turn the handle until it stops.

It depends on how wet the ceiling cavity and insulation are. Small sections are opened when the cavity cannot dry from the surface or when saturated insulation must come out. Drywall that reads dry is left alone.

Yes, if damp materials stay wet. The EPA notes mold can begin to grow on damp surfaces within 24 to 48 hours, which is why extraction and drying start early and readings are checked until materials are dry.

Dealing with this problem now?

Call Now to reach a local water damage professional. Describe the problem, where it is, and what it has touched.

Call Now

Contact

Call now for water damage help

Tap Call Now to reach a local water damage professional. Tell them where the water is, what it has touched, and whether it is still coming in.

Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET

Call Now

Before you call

  • Shut off the main water supply if it is safe to do so.
  • Move valuables, rugs and electronics off wet floors.
  • Take photos of the water and the damage for your records.
  • Stay away from wet outlets, switches and light fixtures.
  • Note when the water started and what caused it, if you know.
Phoenix Water Damage Pros — helper
☎ Call Now